Self-adhesive cable tie mount
They are used for fast and cheap attachment of wires, cables and other light loads using cable ties. The clip can be attached to a smooth, flat surface such as glass, plastic materials, metal sheet without need to drill into the material.
To increase load capacity, you can attach the clip to the material using a screw.
The clamps are not suitable for gluing on plaster, masonry, concrete and outdoor use.
1. Clean surface with a clean cloth and degreaser (alcohol, technical gasoline, etc.)
2. Allow cleaned surface to dry.
3. Remove protecting foil from clip, do not touch adhesive layer with fingers.
4. Attach clip and press firmly against the prepared surface for at least 5 seconds.
5. Allow adhesive to dry on clip without load. Max. load capacity is reached after 3-8 hours.
|Supply No.||Name||A||B||H||S||For tape width||Package|
|19611236||Self-adhesive cable tie mount 12×12, natural||12,5||12,5||4,0||–||3,6||100|
|19611936||Self-adhesive cable tie mount 19×19, natural||19,0||19,0||5,3||2 x 3,2||3,6||100|
|19612048||Self-adhesive cable tie mount 20×20, natural||19,0||19,0||6,6||2 x 2,3||4,8||100|
|19612848||Self-adhesive cable tie mount 28×28, natural||28,0||28,0||7,3||2 x 3,2||4,8||100|
|19612978||Self-adhesive cable tie mount 29×29, natural||29,0||29,0||8,0||2 x 2,7||7,8||100|
|19613910||Self-adhesive cable tie mount 39×39, natural||39,0||39,0||7,5||–||10,5||100|
|19711236||Self-adhesive cable tie mount 12×12, black||12,5||12,5||4,0||–||3,6||100|
|19711936||Self-adhesive cable tie mount 19×19, black||19,0||19,0||5,3||–||3,6||100|
|19713280||Self-adhesive cable tie mount 32×25, black||32,0||25,0||6,6||–||8,0||100|