Self-adhesive cable tie mount

DESCRIPTION:

They are used for fast and cheap attachment of wires, cables and other light loads using cable ties. The clip can be attached to a smooth, flat surface such as glass, plastic materials, metal sheet without need to drill into the material.

To increase load capacity, you can attach the clip to the material using a screw.

The clamps are not suitable for gluing on plaster, masonry, concrete and outdoor use.

Application:

1. Clean surface with a clean cloth and degreaser (alcohol, technical gasoline, etc.)

2. Allow cleaned surface to dry.

3. Remove protecting foil from clip, do not touch adhesive layer with fingers.

4. Attach clip and press firmly against the prepared surface for at least 5 seconds.

5. Allow adhesive to dry on clip without load. Max. load capacity is reached after 3-8 hours.

Self-adhesive cable tie mount
Fields:

Electrical installation

Use:

Electrical cables

Supply No. Name A B H S For tape width Package
    (mm) (mm) (mm) (mm) V (mm) (pcs)
19611236 Self-adhesive cable tie mount 12×12, natural 12,5 12,5 4,0 3,6 100
19611936 Self-adhesive cable tie mount 19×19, natural 19,0 19,0 5,3 2 x 3,2 3,6 100
19612048 Self-adhesive cable tie mount 20×20, natural 19,0 19,0 6,6 2 x 2,3 4,8 100
19612848 Self-adhesive cable tie mount 28×28, natural 28,0 28,0 7,3 2 x 3,2 4,8 100
19612978 Self-adhesive cable tie mount 29×29, natural 29,0 29,0 8,0 2 x 2,7 7,8 100
19613910 Self-adhesive cable tie mount 39×39, natural 39,0 39,0 7,5 10,5 100
19711236 Self-adhesive cable tie mount 12×12, black 12,5 12,5 4,0 3,6 100
19711936 Self-adhesive cable tie mount 19×19, black 19,0 19,0 5,3 3,6 100
19713280 Self-adhesive cable tie mount 32×25, black 32,0 25,0 6,6 8,0 100